Meta Description: A practical guide to power springs (clock springs) for engineers and buyers—torque curves, turns, materials, and what to specify before ordering a custom part.
Power springs go by several names: clock springs, spiral springs, motor springs, retraction springs. Whatever you call them, the engineering conversation is different from linear springs. You’re not specifying a force in newtons—you’re specifying a torque curve over a number of turns.
That difference is where most sourcing problems begin. A buyer sends a drawing with a wire diameter and an outer diameter, expects a quote, and then discovers the spring doesn’t produce enough torque in the middle of its wind. The fix isn’t a different supplier. It’s a better specification.
This guide covers what actually determines power spring performance, and how to specify one so the first sample works.
What a Power Spring Actually Delivers
A power spring stores energy when wound and releases it as torque. Unlike a constant force spring, which delivers steady linear force, a power spring’s output is rotational—and the torque is not flat across the wind.
A typical power spring torque curve looks like this:
- Low torque when the spring is nearly unwound
- Rising torque as it winds tighter
- Peak torque near the fully wound position
- Slight drop-off at the very end of the wind due to coil binding
This curve shape is normal. What matters is where your mechanism operates on that curve. If your device needs consistent torque across 10 turns, you need to specify that—because a standard power spring won’t deliver it without design changes.
Common applications:
- Retractable cords and cable reels — controlled retraction over many turns
- Timing mechanisms and timers — energy storage for delayed action
- Seat belt retractors — controlled winding force
- Window blinds and shade systems — counterbalance across a range of positions
- Medical devices — controlled deployment or retraction
- Toys and consumer products — compact energy storage
If your application needs torque to stay flat across the full wind, you’re actually looking for a constant torque spring—a related but distinct product. That’s worth clarifying before you request samples.
The Five Numbers That Define a Power Spring
Most power spring failures trace back to one of these being wrong or unspecified. Get them right, and the design conversation becomes straightforward.
1. Torque at the Working Position
Not maximum torque—the torque you need at the position where the spring actually does its job. A spring that produces 2 N·m at full wind but only 0.5 N·m at your operating point is the wrong spring.
2. Number of Turns
How many full rotations does the spring need to deliver? This determines the spring’s length, thickness, and outer diameter. A spring designed for 5 turns will not perform the same at 15 turns—the torque curve shifts, and fatigue life changes.
3. Direction of Wind
Clockwise or counterclockwise? This sounds trivial, but it determines the coil orientation and the mounting direction. Getting it wrong means the spring either doesn’t fit or winds the wrong way.
4. Cycle Life
How many wind-unwind cycles will the spring see? 5,000 cycles and 50,000 cycles require different stress levels and often different materials. If you don’t specify it, you may get a spring optimized for torque that fails early.
5. Space Envelope
Outer diameter, inner diameter (if it mounts on a shaft), width, and the space available for the spring housing. A power spring that meets every torque requirement but doesn’t fit in the housing is still a failed part.
Material Selection for Power Springs
Power springs operate at higher stress levels than most linear springs because they’re storing energy in a compact space. Material choice directly affects both torque and fatigue life.
| Material | Best For | Trade-offs |
|---|---|---|
| 301 Stainless Steel | General purpose, good fatigue resistance | Standard choice for most applications |
| 302 Stainless Steel | Better corrosion resistance | Slightly lower fatigue strength |
| 316 Stainless Steel | Marine, medical, chemical exposure | Higher cost, lower spring temper |
| Carbon Steel (blue tempered) | High torque, cost-sensitive | Corrosion risk; needs plating or coating |
| 17-7 PH Stainless | High-cycle, high-stress applications | Higher cost, longer lead time |
For most industrial power springs, 301 stainless is the default. If the application involves moisture or washdown, step up to 316. If you need maximum torque in a dry, controlled environment, blue-tempered carbon steel can work—but be honest about the corrosion risk.
The Torque Curve Question You Should Always Ask
When you request a quote for a power spring, ask for a torque-vs-turns curve for the specific part being quoted. Not a catalog curve. Not a generic performance range. The actual predicted curve for your dimensions and material.
A supplier who can provide this is a supplier who understands power spring design. A supplier who says “it’s a standard spring, it’ll work” is a supplier who will cost you a prototype cycle.
If you can provide your own required torque curve—even a simple sketch showing torque at 0%, 50%, and 100% of wind—that’s even better. It lets the spring engineer design to your operating window instead of guessing.
Common Mistakes in Power Spring Sourcing
Mistake 1: Specifying only maximum torque. A spring that hits your peak torque but drops too low mid-wind won’t work. Specify torque at multiple points.
Mistake 2: Ignoring the direction of wind. This is a surprisingly common error. Confirm clockwise or counterclockwise before tooling is made.
Mistake 3: Underestimating cycle life requirements. A power spring tested to 10,000 cycles may fail at 30,000. If your product needs to last years, say so upfront.
Mistake 4: Assuming all stainless steels perform the same. 301 and 316 have different spring properties. The difference matters in high-cycle applications.
Mistake 5: Not accounting for installation pre-load. How the spring is installed affects its starting torque. If it’s pre-wound during assembly, that changes the curve.
A Realistic Timeline for Custom Power Springs
Power springs require tooling and careful winding, so timelines are longer than for standard compression springs.
- Specification review and curve analysis — 1–3 days
- Design and torque simulation — 3–5 days
- Tooling and sample production — 10–20 days
- Torque testing and report — 2–3 days
- Revision if needed — 5–10 days
Total: roughly 4–6 weeks for a first article that matches the specified torque curve. If a supplier promises a custom power spring in under two weeks, ask what they’re compromising on—because something has to give.
The Bottom Line
Power springs are energy storage devices, and they need to be specified like energy storage devices—by torque, turns, and cycle life, not just dimensions. The buyers who get this right are the ones who provide a torque requirement and a space envelope, then let the spring engineer do the design work.
If you have a torque curve or a set of operating requirements, send them over. We’ll tell you what’s achievable, what material fits best, and how long a sample will take—before you commit to tooling.
About the author: Dongguan Bowin Spring Hardware manufactures power springs, constant force springs, and variable force springs for industrial, medical, and automotive applications. Custom samples in as fast as 5-7 days.